C3Fire

Difference between revisions of "Config/RemoveUnits"

From C3LearningLabs
Line 108: Line 108:
 
#Remove units  
 
#Remove units  
 
#Renumber units
 
#Renumber units
 +
#Uppdate number dependent information for all units.
 +
#Update SendInfoTo
  
 
;Renumber units
 
;Renumber units

Revision as of 20:34, 26 August 2021


Create new configuration files

Copy Folder
Copy existing configuration folder.
Rename all files in folder
Example
P4-F8L2R2B1Uav1-3x15min
P4: 4 Players
F8: 8 Fire fighting units
L2: 2 Logistic units
R2: 2 Search and Rescue units
B1: 1 Fire break unit
Uav1: 1 Uav unit
3x15min: 3 experiment session a 15 minutes, the training session are not counted.


Update file references in config files
Update the start of all *.con files.
Example
<Config
  Type = "ForestFire"
  ConfigIncludeFile_ComunicationUI = ""
  ConfigIncludeFile_ComunicationUIEvents = ""
  ConfigIncludeFile_MapObjectTypes = "../P4-F8L2R2B1Uav1-3x15min-Global-ObjectsTypes.coni"
  ConfigIncludeFile_MapObjectsPos = "P4-F8L2R2B1Uav1-3x15min-C1-MapObjectsPos.coni"
  ConfigIncludeFile_People = "../P4-F8L2R2B1Uav1-3x15min-Global-People.coni"
  ConfigIncludeFile_PeoplePos = "P4-F8L2R2B1Uav1-3x15min-C1-PeoplePos.coni"
  ConfigIncludeFile_Roles = "../P4-F8L2R2B1Uav1-3x15min-Global-Roles.coni"
  ConfigIncludeFile_RolesScrollPos = "P4-F8L2R2B1Uav1-3x15min-C1-RolesScrollPos.coni"
  ConfigIncludeFile_StationActivityControlsUI = ""
  ConfigIncludeFile_Stations = ""
  ConfigIncludeFile_UAVsPos = "P4-F8L2R2B1Uav1-3x15min-C1-UAVsPos.coni"
  ConfigIncludeFile_UnitInfoUI = "../P4-F8L2R2B1Uav1-3x15min-Global-UnitsInfoUI.coni"
  ConfigIncludeFile_Units = "../P4-F8L2R2B1Uav1-3x15min-Global-Units.coni"
  ConfigIncludeFile_UnitsPos = "P4-F8L2R2B1Uav1-3x15min-C1-UnitsPos.coni"
  ConfigIncludeFile_UserInterface = "../P4-F8L2R2B1Uav1-3x15min-Global-UIMain.coni"
  ConfigIncludeFile_UserInterfaceGlobal = "../P4-F8L2R2B1Uav1-3x15min-Global-UIGlobal.coni"
  ConfigIncludeFile_VehicleActivityControlsUI = ""
  ConfigIncludeFile_Vehicles = ""
  Version = "4.0.1" >


Update session info.
This is important.
The information will be stored in the logfiles, and used by the analyses process.
Update the <SessionInfo> in all *.con files.
Example
  <SessionInfo
    ConditionName = "C1"
    ConditionNumber = "1"
    ExperimentGroup = ""
    ExperimentName = "P4-P4-F8L2R2B1Uav1-3x15min"
    ServerName = ""
    ServerNumber = "0"
    SessionConfigFileName = "P4-P4-F8L2R2B1Uav1-3x15min-C3.con"
    SessionName = ""
    SessionNumber = ""
    SessionPicDirectory = ""
    SessionScenarioFileName = "P4-P4-F8L2R2B1Uav1-3x15min-C3.sce"
    SessionType = "" />



Set the default configuration

To make it easier to develop a new session configuration set the default configuration file in the Client configuration. Then you don't need to manually browse the configuration file every time you start a session.

See Set default configuration

Edit File
...\C3LearningLabs\C3Fire\Client\Files\ROOT\C3FireClientConfig.xml

Set the folder for the new configuration and the config and scenario file name. 

...
 <DefaultFiles
  SessionConfigDirectory  = "SessionDef/Projects/P4-F8L2R2B1Uav1-3x15min/Condition-1"
  SessionLogDirectory     = "../../../Server/SessionLogs"
  ScenarioDirectory       = "SessionDef/Projects/P4-F8L2R2B1Uav1-3x15min/Condition-1"
  MapImageDirectory       = "SessionDef/Projects/P4-F8L2R2B1Uav1-3x15min/Condition-1"
  SequenceConfigDirectory = ""
  SessionConfigFile       = "P4-F8L2R2B1Uav1-3x15min-C1-F80.con"
  ScenarioFile            = "P4-F8L2R2B1Uav1-3x15min-C1.sce"
  MapImageFile            = ""
  SequenceConfigFile      = "" />
...


Units

Update the Units
Edit file: ...\C3LearningLabs\C3Fire\Client\SessionDef\Projects\P4-F8L2R2B1Uav1-3x15min\P4-F8L2R2B1Uav1-3x15min-Global-Units.coni
  1. Remove units
  2. Renumber units
  3. Uppdate number dependent information for all units.
  4. Update SendInfoTo
Renumber units
For every unit update.
<Units>
...
    <Unit
      IDName = "D14"
      ...
      ControlDisplay = "..."
      ...
      ImageGoTo = "Unit\Number\White\14-White.gif"
      ImageGoToSelected = "Unit\Number\White\14-White-Selected.gif"
      ImagePos = "Unit\Number\Gray\14-Gray.gif"
      ImagePosSelected = "Unit\Number\Gray\14-Gray-Selected.gif"
      ...
      LongName = "Unmanned Aircraft Vehicle 14"
...
Set to what role the units will send info to
<Units>
...
    <Unit
      IDName = "F1"
      SendInfoTo = "B"

    <Unit
      IDName = "F2"
      SendInfoTo = "B"

    <Unit
      IDName = "F3"
      SendInfoTo = "B"

    <Unit
      IDName = "F4"
      SendInfoTo = "B"

    <Unit
      IDName = "F5"
      SendInfoTo = "C"

    <Unit
      IDName = "F6"
      SendInfoTo = "C"

    <Unit
      IDName = "F7"
      SendInfoTo = "C"

    <Unit
      IDName = "F8"
      SendInfoTo = "C"

    <Unit
      IDName = "B9"
      SendInfoTo = "D"

    <Unit
      IDName = "L10"
      SendInfoTo = "D"

    <Unit
      IDName = "L11"
      SendInfoTo = "D"

    <Unit
      IDName = "R12"
      SendInfoTo = "B"

    <Unit
      IDName = "R13"
      SendInfoTo = "C"

    <Unit
      IDName = "D14"
      SendInfoTo = "A"
...

UAVs

Update what role are controlling the UAV.
Edit main config files
...\SessionDef\Projects\P4-F8L2R2B1Uav1-3x15min\Condition-1\P4-F8L2R2B1Uav1-3x15min-C1.con
...\SessionDef\Projects\P4-F8L2R2B1Uav1-3x15min\Condition-2\P4-F8L2R2B1Uav1-3x15min-C2.con
...\SessionDef\Projects\P4-F8L2R2B1Uav1-3x15min\Condition-3\P4-F8L2R2B1Uav1-3x15min-C3.con
...\SessionDef\Projects\P4-F8L2R2B1Uav1-3x15min\Training-1\P4-F8L2R2B1Uav1-3x15min-T1.con
...\SessionDef\Projects\P4-F8L2R2B1Uav1-3x15min\Training-2\P4-F8L2R2B1Uav1-3x15min-T2.con
  1. Set IDName
  2. Set controller - ControllerActive = "A"


<UAVs>
    <UAV
      IDName = "D14"
      ControllerActive = "A"

Organisation

Create new role
Edit file: ...\C3LearningLabs\C3Fire\Client\SessionDef\Projects\P4-F8L2R2B1Uav1-3x15min\P4-F8L2R2B1Uav1-3x15min-Global-Roles.coni
  1. Set id name - IDName = "..."
  2. Set the units the role control, For all roles - ControlUnits = "..."
  3. Set name - LongName = "..."
  4. Set mail - MailSendTo = "..."


<Roles>
    <Role
      IDName = "A"
      ControlUnits = "D14"
      LongName = "Ground Chief A"
      MailSendTo = "B,C,D"/>

    <Role
      IDName = "B"
      ControlUnits = "F1,F2,F3,F4,R12"
      LongName = "Ground Chief B"
      MailSendTo = "A,C,D" />

    <Role
      IDName = "C"
      ControlUnits = "F4,F5,F6,F7,R13"
      LongName = "Ground Chief C"
      MailSendTo = "A,B,D" />

    <Role
      IDName = "D"
      ControlUnits = "B9,L10,L11"
      LongName = "Ground Chief D"
      MailSendTo = "A,B,C" />

Map

Roles Map Scroll Positions

Update all roles map scroll positions.

Edit file:

  • .../Condition-1/P4-F8L2R2B1Uav1-3x15min-C1-RolesScrollPos.coni
  • .../Condition-2/P4-F8L2R2B1Uav1-3x15min-C2-RolesScrollPos.coni
  • .../Condition-3/P4-F8L2R2B1Uav1-3x15min-C3-RolesScrollPos.coni
  • .../Training-1/P4-F8L2R2B1Uav1-3x15min-T1-RolesScrollPos.coni
  • .../Training-2/P4-F8L2R2B1Uav1-3x15min-T2-RolesScrollPos.coni


  <RolesScrollPos>

    <Role
      IDName = "A"
      MapStartCenterScrollPos = "20,20" />

    <Role
      IDName = "B"
      MapStartCenterScrollPos = "20,20" />

    <Role
      IDName = "C"
      MapStartCenterScrollPos = "20,20" />

    <Role
      IDName = "D"
      MapStartCenterScrollPos = "20,20" />

Units Map Positions

Update all Units map positions.

Edit file:

  • .../Condition-1/P4-F8L2R2B1Uav1-3x15min-C1-UnitsPos.coni
  • .../Condition-2/P4-F8L2R2B1Uav1-3x15min-C2-UnitsPos.coni
  • .../Condition-3/P4-F8L2R2B1Uav1-3x15min-C3-UnitsPos.coni
  • .../Training-1/P4-F8L2R2B1Uav1-3x15min-T1-UnitsPos.coni
  • .../Training-2/P4-F8L2R2B1Uav1-3x15min-T2-UnitsPos.coni
  1. Update F9 to B9
  2. Update L12 to R12
  3. Delete R14
  4. Update D15 to D14

Example 

    <Unit
      IDName = "B9"
      Pos = "23,22" />

    <Unit
      IDName = "D14"
      Pos = "20,21" />

UAVs Map Positions

Update all UAVs map positions.

Edit file:

  • .../Condition-1/P4-F8L2R2B1Uav1-3x15min-C1-UAVsPos.coni
  • .../Condition-2/P4-F8L2R2B1Uav1-3x15min-C2-UAVsPos.coni
  • .../Condition-3/P4-F8L2R2B1Uav1-3x15min-C3-UAVsPos.coni
  • .../Training-1/P4-F8L2R2B1Uav1-3x15min-T1-UAVsPos.coni
  • .../Training-2/P4-F8L2R2B1Uav1-3x15min-T2-UAVsPos.coni

UnitInfoDisplay

UnitInfoDisplayOutline

Update unit information outline display.

Edit file : P4-F8L2R2B1Uav1-3x15min-Global-UnitsInfoUI.coni

For A, B, C, D and Manger, update what units that should be visible in the Unit info panels.
Update all.
<UnitInfoDisplayOutlineRow
UnitIDName = "..."
UnitInfoDisplayDetail = "..." />


  <UnitInfoDisplayOutline
      Name = "Ground Chief A" >
      ...
      <UnitInfoDisplayOutlineRow
        UnitIDName = "D14"
        UnitInfoDisplayDetail = "UAV" />
      
  </UnitInfoDisplayOutline>

  <UnitInfoDisplayOutline
      Name = "Ground Chief B" >
      ...
      <UnitInfoDisplayOutlineRow
        UnitIDName = "F1"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F2"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F3"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F4"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "R12"
        UnitInfoDisplayDetail = "PersonTransporter" />

   </UnitInfoDisplayOutline>

   <UnitInfoDisplayOutline
      Name = "Ground Chief C" >
      ...
      <UnitInfoDisplayOutlineRow
        UnitIDName = "F5"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F6"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F7"
        UnitInfoDisplayDetail = "WaterTruck" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F8"
        UnitInfoDisplayDetail = "WaterTruck" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "R13"
        UnitInfoDisplayDetail = "PersonTransporter" />

    </UnitInfoDisplayOutline>

    <UnitInfoDisplayOutline
      Name = "Ground Chief D" >
      ...
  
      <UnitInfoDisplayOutlineRow
        UnitIDName = "B9"
        UnitInfoDisplayDetail = "FireBreak" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "L10"
        UnitInfoDisplayDetail = "WaterTruck" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "L11"
        UnitInfoDisplayDetail = "WaterTruck" />

    </UnitInfoDisplayOutline>

  <UnitInfoDisplayOutline
      Name = "Manager" >
      ...
      <UnitInfoDisplayOutlineRow
        UnitIDName = "F1"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F2"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F3"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F4"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F5"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F6"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F7"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "F8"
        UnitInfoDisplayDetail = "FireFighter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "B9"
        UnitInfoDisplayDetail = "FireBreak" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "L10"
        UnitInfoDisplayDetail = "WaterTruck" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "L11"
        UnitInfoDisplayDetail = "WaterTruck" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "R12"
        UnitInfoDisplayDetail = "PersonTransporter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "R13"
        UnitInfoDisplayDetail = "PersonTransporter" />

      <UnitInfoDisplayOutlineRow
        UnitIDName = "D14"
        UnitInfoDisplayDetail = "UAV" />

    </UnitInfoDisplayOutline>

Update Role info

Update what unit information outline display each role should display
Edit file: P4-F8L2R2B1Uav1-3x15min-Global-Roles.coni
  1. Update information outline display name for each role - UnitInfoDisplayOutline = "..."


   <Role
     IDName = "A"
     ...
     UnitInfoDisplayOutline = "Ground Chief A"
    
    <Role
      IDName = "B"
      ...
      UnitInfoDisplayOutline = "Ground Chief B"

    <Role
      IDName = "C"
      ...
      UnitInfoDisplayOutline = "Ground Chief C"
    
     <Role
       IDName = "D"
       ...
       UnitInfoDisplayOutline = "Ground Chief D"
Retrieved from "http://192.168.1.141:36040/w/index.php?title=Config/RemoveUnits&oldid=1730"