Difference between revisions of "Config/P4-F8B2L3D1-3x15min-To-P4-F4B4L4D4-3x15min-3x15min"
From C3LearningLabs
(→Units) |
(→Units) |
||
Line 170: | Line 170: | ||
;Set to what role the units will send info to | ;Set to what role the units will send info to | ||
+ | :In same configuration file, for every unit update who this unit should send information to. | ||
<source> | <source> | ||
<Units> | <Units> | ||
Line 175: | Line 176: | ||
<Unit | <Unit | ||
IDName = "F1" | IDName = "F1" | ||
+ | ... | ||
SendInfoTo = "B" | SendInfoTo = "B" | ||
<Unit | <Unit | ||
IDName = "F2" | IDName = "F2" | ||
+ | ... | ||
SendInfoTo = "B" | SendInfoTo = "B" | ||
<Unit | <Unit | ||
IDName = "F3" | IDName = "F3" | ||
+ | ... | ||
SendInfoTo = "B" | SendInfoTo = "B" | ||
<Unit | <Unit | ||
IDName = "F4" | IDName = "F4" | ||
+ | ... | ||
SendInfoTo = "B" | SendInfoTo = "B" | ||
<Unit | <Unit | ||
IDName = "F5" | IDName = "F5" | ||
+ | ... | ||
SendInfoTo = "C" | SendInfoTo = "C" | ||
<Unit | <Unit | ||
IDName = "F6" | IDName = "F6" | ||
+ | ... | ||
SendInfoTo = "C" | SendInfoTo = "C" | ||
<Unit | <Unit | ||
IDName = "F7" | IDName = "F7" | ||
+ | ... | ||
SendInfoTo = "C" | SendInfoTo = "C" | ||
<Unit | <Unit | ||
IDName = "F8" | IDName = "F8" | ||
+ | ... | ||
SendInfoTo = "C" | SendInfoTo = "C" | ||
<Unit | <Unit | ||
IDName = "B9" | IDName = "B9" | ||
+ | ... | ||
SendInfoTo = "D" | SendInfoTo = "D" | ||
<Unit | <Unit | ||
IDName = "L10" | IDName = "L10" | ||
+ | ... | ||
SendInfoTo = "D" | SendInfoTo = "D" | ||
<Unit | <Unit | ||
IDName = "L11" | IDName = "L11" | ||
+ | ... | ||
SendInfoTo = "D" | SendInfoTo = "D" | ||
<Unit | <Unit | ||
IDName = "R12" | IDName = "R12" | ||
+ | ... | ||
SendInfoTo = "B" | SendInfoTo = "B" | ||
<Unit | <Unit | ||
IDName = "R13" | IDName = "R13" | ||
+ | ... | ||
SendInfoTo = "C" | SendInfoTo = "C" | ||
<Unit | <Unit | ||
IDName = "D14" | IDName = "D14" | ||
+ | ... | ||
SendInfoTo = "A" | SendInfoTo = "A" | ||
... | ... | ||
</source> | </source> |
Revision as of 12:07, 29 September 2023
Goal
In this example we will change the organization and units in an existing configuration.
- Start Configuration - P4-F8B2L3D1 (P4-F8B2L3D1-3x15min)
- P4 = 4 Players
- F8 = 8 fire fighting units
- B2 = 2 Fire Break units
- L3 = 3 Logistics units
- D1 = 1 Drone
- Goal Configuration - P4-F4B4L4D4 (P4-F4B4L4D4-3x15min)
- P4 = 4 Players
- F4 = 4 fire fighting units
- B4 = 4 Fire Break units
- L4 = 4 Logistics units
- D4 = 4 Drone
- Changes
- Players, change what units the players control.
- Fire fighting units, remove 4 unit.
- Fire break unit, add 2 unit.
- Logistics units, add 1 unit.
- Drone, add 3 unit.
Create new configuration files
- Copy Folder
- Copy the selected configuration folder that contain the good configuration.
- Source : ...\C3LearningLabs\C3Fire\Client\SessionDef\Projects\P4-F8B2L3D1-3x15min
- New Folder: ...\C3LearningLabs\C3Fire\Client\SessionDef\Projects\P4-F4B4L4D4-3x15min
- Rename all files in folder
- Rename all the files so it get the new good experiment name.
- P4-F8B2L3D1-3x15min => P4-F4B4L4D4
- Update file references in config files
- The main configuration files contains references to all files that build up the total configuration.
- Update these files.
- ...\SessionDef\Projects\P4-F4B4L4D4-3x15min\Condition-1\P4-F4B4L4D4-C1.con
- ...\SessionDef\Projects\P4-F4B4L4D4-3x15min\Condition-2\P4-F4B4L4D4-C2.con
- ...\SessionDef\Projects\P4-F4B4L4D4-3x15min\Condition-3\P4-F4B4L4D4-C3.con
- ...\SessionDef\Projects\P4-F4B4L4D4-3x15min\Training-1\P4-F4B4L4D4-T1.con
- ...\SessionDef\Projects\P4-F4B4L4D4-3x15min\Training-2\P4-F4B4L4D4-T2.con
- In this example replace, P4-F9L3R2Uav1-3x15min => P4-F8L2R2B1Uav1-3x15min
<Config
Type = "ForestFire"
ConfigIncludeFile_ComunicationUI = ""
ConfigIncludeFile_ComunicationUIEvents = ""
ConfigIncludeFile_MapObjectTypes = "../P4-F4B4L4D4-Global-ObjectsTypes.coni"
ConfigIncludeFile_MapObjectsPos = "P4-F4B4L4D4-C1-MapObjectsPos.coni"
ConfigIncludeFile_People = "../P4-F4B4L4D4-Global-People.coni"
ConfigIncludeFile_PeoplePos = "P4-F4B4L4D4-C1-PeoplePos.coni"
ConfigIncludeFile_Roles = "../P4-F4B4L4D4-Global-Roles.coni"
ConfigIncludeFile_RolesScrollPos = "P4-F4B4L4D4-C1-RolesScrollPos.coni"
ConfigIncludeFile_StationActivityControlsUI = ""
ConfigIncludeFile_Stations = ""
ConfigIncludeFile_UAVsPos = "P4-F4B4L4D4-C1-UAVsPos.coni"
ConfigIncludeFile_UnitInfoUI = "../P4-F4B4L4D4-Global-UnitsInfoUI.coni"
ConfigIncludeFile_Units = "../P4-F4B4L4D4-Global-Units.coni"
ConfigIncludeFile_UnitsPos = "P4-F4B4L4D4-C1-UnitsPos.coni"
ConfigIncludeFile_UserInterface = "../P4-F4B4L4D4-Global-UIMain.coni"
ConfigIncludeFile_UserInterfaceGlobal = "../P4-F4B4L4D4-Global-UIGlobal.coni"
ConfigIncludeFile_VehicleActivityControlsUI = ""
ConfigIncludeFile_Vehicles = ""
Version = "4.0.1" >
- Update session info.
- This is important
- The session information is information that describes the experiment sessions.
- The information will be stored in the logfiles, and can be used in the analyses process.
- ...\SessionDef\Projects\P4-F4B4L4D4-3x15min\Condition-1\P4-F4B4L4D4-C1.con
- ...\SessionDef\Projects\P4-F4B4L4D4-3x15min\Condition-2\P4-F4B4L4D4-C2.con
- ...\SessionDef\Projects\P4-F4B4L4D4-3x15min\Condition-3\P4-F4B4L4D4-C3.con
- ...\SessionDef\Projects\P4-F4B4L4D4-3x15min\Training-1\P4-F4B4L4D4-T1.con
- ...\SessionDef\Projects\P4-F4B4L4D4-3x15min\Training-2\P4-F4B4L4D4-T2.con
- Example
<SessionInfo
ConditionName = "C1"
ConditionNumber = "1"
ExperimentGroup = ""
ExperimentName = "P4-F4B4L4D4-3x15min"
ServerName = ""
ServerNumber = "0"
SessionConfigFileName = "P4-F4B4L4D4-C3.con"
SessionName = ""
SessionNumber = ""
SessionPicDirectory = ""
SessionScenarioFileName = "P4-F4B4L4D4-C3.sce"
SessionType = "" />
Set the default configuration
To make it easier to develop a new session configuration set the default configuration file in the Client configuration. Then you don't need to manually browse the configuration file every time you start a session.
- Edit File
- ...\C3LearningLabs\C3Fire\Client\Files\ROOT\C3FireClientConfig.xml
Set the folder for the new configuration and the config and scenario file name.
...
<DefaultFiles
SessionConfigDirectory = "SessionDef/Projects/P4-F4B4L4D4-3x15min/Condition-1"
SessionLogDirectory = "../../../Server/SessionLogs"
ScenarioDirectory = "SessionDef/Projects/P4-F4B4L4D4-3x15min/Condition-1"
MapImageDirectory = "SessionDef/Projects/P4-F4B4L4D4-3x15min/Condition-1"
SequenceConfigDirectory = ""
SessionConfigFile = "P4-F4B4L4D4-3x15min-C1-F80.con"
ScenarioFile = "P4-F4B4L4D4-3x15min-C1.sce"
MapImageFile = ""
SequenceConfigFile = "" />
...
Units
- Update the Units
- Edit file: ...\C3LearningLabs\C3Fire\Client\SessionDef\Projects\P4-F8L2R2B1Uav1-3x15min\P4-F8L2R2B1Uav1-3x15min-Global-Units.coni
- Updated so it is:
- P4 = 4 Players
- F4 = 4 fire fighting units
- B4 = 4 Fire Break units
- L4 = 4 Logistics units
- D4 = 4 Drone
- Did the following steps.
- Remove fire fighting unit 5 to 8
- Renumber and add 2 fire break unit 9, copy existing fire break unit.
- Renumber and add 1 logistics unit 9, copy existing logistics unit.
- Renumber and add 3 drone, copy existing drone
- Renumber units
- For every unit update, IDName, LongName, ControlDisplay, ImageGoTo, ImageGoToSelected, ImagePos, ImagePosSelected
- Remember to update the unit number in the image file names.
<Units>
...
<Unit
IDName = "D14"
...
ControlDisplay = "..."
...
ImageGoTo = "Unit\Number\White\14-White.gif"
ImageGoToSelected = "Unit\Number\White\14-White-Selected.gif"
ImagePos = "Unit\Number\Gray\14-Gray.gif"
ImagePosSelected = "Unit\Number\Gray\14-Gray-Selected.gif"
...
LongName = "Unmanned Aircraft Vehicle 14"
...
- Set to what role the units will send info to
- In same configuration file, for every unit update who this unit should send information to.
<Units>
...
<Unit
IDName = "F1"
...
SendInfoTo = "B"
<Unit
IDName = "F2"
...
SendInfoTo = "B"
<Unit
IDName = "F3"
...
SendInfoTo = "B"
<Unit
IDName = "F4"
...
SendInfoTo = "B"
<Unit
IDName = "F5"
...
SendInfoTo = "C"
<Unit
IDName = "F6"
...
SendInfoTo = "C"
<Unit
IDName = "F7"
...
SendInfoTo = "C"
<Unit
IDName = "F8"
...
SendInfoTo = "C"
<Unit
IDName = "B9"
...
SendInfoTo = "D"
<Unit
IDName = "L10"
...
SendInfoTo = "D"
<Unit
IDName = "L11"
...
SendInfoTo = "D"
<Unit
IDName = "R12"
...
SendInfoTo = "B"
<Unit
IDName = "R13"
...
SendInfoTo = "C"
<Unit
IDName = "D14"
...
SendInfoTo = "A"
...