Object Types

The xml element ObjectTypes defines all the geographical object types in a session.

<ObjectTypes>
  <ObjectType> 
  <ObjectType> 
  ...
  <ObjectType> 
</ObjectTypes>

The xml element ObjectType defines a geographical object type and contain a set of basic properties. Beside the basic properties the activated modules can add properties for the ObjectTypes. See documentation for each module.

A geographical object type is defined with the following properties:


Property	Module	Value
IDName		The identification name for a object type. Value example = "Pine", "Birch", "House", "Water"
Description		Object description. Value example= "Water post"/>
DestroyEffect	Forest Fire	What happens when the object are in fire. See DestroyEffect Value example= "Fuel station"/>
FireSpeed	Forest Fire	The fire spread factor for this object. The ignite time is multiplied with this value. Value example= "1" Value example = "0.5" For more information see the fire simulation documentation.
FuelRefillSpeed	Logistic Fuel	The amount of fuel this object can to deliver every second to a unit that is refilling fuel from this object. Apply on object type "fuel". Value example = "15" Module : Fuel Logistic Should only be defined if the module FuelLogistic is active.
Image		The Image
UnitMovementSpeed		Units movement delay factor.
ValueEmotional		Emotional value.
ValueMaterial		Material Value.
WaterRefillSpeed	Logistic Water	The amount of water this object can to deliver every second to a unit that is refilling water from this object. Apply on object type "water". Value example = "15" Module : Water Logistic Should only be defined if the module WaterLogistic is active.

    <ObjectType
      IDName = "Normal"
      Description = ""
      DestroyEffect = ""
      FireSpeed = "1"
      FuelRefillSpeed = "5"
      Image = "Object/Normal.gif"
      UnitMovementSpeed = "1"
      ValueEmotional = "1"
      ValueMaterial = "1"
      WaterRefillSpeed = "5" />

Objects

The xml element Objects contains all map objects that should exist in the simulation.

Object

Defines where a map object should exist.

Configuration example:

<source>
<Objects>
  <Object> ... </Object>
  <Object> ... </Object>
  ...
  <Object> ... </Object>
 <Object Type = "Pine" Pos = "12,12" />
    <Object Type = "Pine" Pos = "12,11" />
    <Object Type = "Pine" Pos = "11,2" />
    <Object Type = "Birch" Pos = "38,23" />
    <Object Type = "Birch" Pos = "23,40" />
    <Object Type = "Birch" Pos = "2,32" />
    <Object Type = "House" Pos = "40,40" />
    <Object Type = "Water" Pos = "17,22" />
    <Object Type = "Fuel"  Pos = "11,12" />
    <Object Type = "Water"  Pos = "10,10" />
</Objects>
</source>

A object is defined with the following properties:


Property	Value
Type	The object type identification number. Value example = "House" Value example= "Pine"
Pos	Pos on the map Value example = "2, 20" Value example= "12,12"

<Source>
    <Object
        Type = "Pine" 
         Pos = "12,12" 
    />
</Source>

Object Image

The image representing this object on the map should have the file name IDName with '12.gif' as a
extension ( <IDName>12.gif).

Example : Pine12.gif

The image file should be stored in the map image catalog <C3FIRE-MAP-IMAGES> , located at <C3FIRE-WWW-ROOT>/pic/

Example : C:\c3fire\www\pic\Pine12.gif

The standard experiment setting defines four object types. They are Normal, Pine, Birch and House.
The module extended setting defines an additional object type, Water. The type must be represented
of an image, named and saved according to examples above.

Standard experiment setting

Normal :

Pine :

Birch :

House :

Module extended setting
Water :

The different
geographical objects

Display Objects

The xml element Objects contains all map objects that should be visible on the users map at start.

DisplayObject

Defines where a map object should exist on the map.

Configuration example

<source>
<DisplayObjects>
  <DisplayObject> ... </DisplayObject>
  <DisplayObject> ... </DisplayObject>
  ...
  <DisplayObject> ... </DisplayObject>
    <DisplayObject Type = "Pine"  Pos = "5,10" />
    <DisplayObject Type = "Pine"  Pos = "38,22" />
    <DisplayObject Type = "Birch" Pos = "37,23" />
    <DisplayObject Type = "Birch" Pos = "1,2" />
    <DisplayObject Type = "Birch" Pos = "23,34" />
    <DisplayObject Type = "House" Pos = "1,38" />
    <DisplayObject Type = "Water" Pos = "17,22" />
    <DisplayObject Type = "Fuel"  Pos = "11,12" />
    <DisplayObject Type = "Water"  Pos = "10,10" />    
</DisplayObjects>
</source>

A DisplayObject is defined with the following properties:


Property	Value
Type	The object type identification number. Value example = "House" Value example= "Pine"
PosX	Pos on the map Value example = "5, 10" Value example= "12,12"

 
<Source>
    <DisplayObject
        Type = "Pine" 
         Pos = "12,12" 
    />
</Source>

DestroyEffect

 
  <DestroyEffects>

    <DestroyEffect
      IDName = "FuelStation"
      Description = "When the fuel station is in fire it will explode, All unit in the area 3x3 will be destroyed."
      DestroyTime = "0.0"
      FireRadie = "2"
      FireType = "Fire"
      ObjectRadie = "0"
      ObjectType = ""
      UnitRadie = "2"
      UnitType = "Destroy"
      WhenFireBurnedOut = "False"
      WhenInFire = "True"
      WhenInFireAndOutOfWater = "False" />

  </DestroyEffects>

Edit Objects on Map

Examples

Change House to Hospital

If you have a map with houses and want to chance some house to a hospital follow these steps.

Map Editor

Undocumented feature

Description below make it possible to manipulate the map (objects and units) and save it to disk.

Activation

In Players UI configuration in file <config_name>-UIMain-Mac.coni set ObjectPalette config to

      <Object
        Name = "ObjectPalette"
        BorderVisible = "True"
        Enabeled = "true"      Should be true
        Pos = "1222,290"   
        Size = "120,180"
        Visible = "true"       Should be true
        VisibleObjects = "" /> Should be empty

Start the session and let the session run

Map maipulation: While the session is running you can do this, (Save before session end).; The mouse pointer needs to be on the map to make the key commands to work.; Copy the saved object and unit positions to you configuration

Use the object palette to insert and delete objects in the map.

Alt-S : Save, saves the map to, ...\C3LearningLabs\C3Fire\Client\Files\Root\saved-map.txt

Alt-R : Rotate the map clockwise
Alt-L : Rotate the map counter clockwise

Alt-H : Mirror horizontally
Alt-V : Mirror vertically

Alt-T : Mirror top right bottom left
Alt-U : Mirror top left bottom right

C3Fire

Object Configuration

Contents